|
EXPLORER
|
|
BEAR MGC USA
|
|
FROST CUTLERY
|
|
|
|
|
|
|
|
|
Nice slip joint folding knife with scrimshaw scene of a hunter with his dog. The knife has a 2.5" s.s. blade and scrimshaw scale on one side. The handle scale is fake ivory. The knife measures 3.5" closed. Never used mint condition. Made in Japan.
|
Vintage BEAR MGC lock-back folding knife with scrimshaw elk scene by Bouche. The 2.25" blade has pitting on both sides and is in need of sharpening. The handle scales are fake ivory with some small holes here and there on one side. The knife has double brass bolsters that are pretty dinged up. Nice scrimshaw scene. The knife works well has plenty of snap just seen some use over the years. Good working condition is what I would call it.
|
Vintage 80's Frost Cutlery Quail Hunter 527 Lock-back folding knife MIB. The 2" surgical steel blade has etching of a quail in a tree. The handle scales are genuine bone stag accented with double bolsters. The knife measures 2.75" closed. Like new in the original box. Made in Japan.
|
|
|
|
SCHRADE
|
|
SCHRADE
|
|
KLEIN TOOL
|
|
|
|
|
|
|
|
|
Vintage Schrade USA L 85 near mint needs a little polish.
|
Vintage Schrade Gift Set SP1 lockback & SP3 mint in the box. The blades are 2.5" and 1.5". Nylon sheath and box all mint.
|
Vintage 1980's lock-back folding knife similar to the buck 110, handmade in Japan for Klein Tool. The 2" 440 s.s. blade is hollow ground with a brush finish. Blade is stamped with #44035. The handle scales are deep rich rosewood accented with heavy brass bolsters and pins. The knife measures 5" open. Fantastic quality this knife was made to last for generations. Mint condition.
|
|
|
|
ROUGH RYDER
|
|
SMITH & WESSON
|
|
KA-BAR
|
|
|
|
|
|
|
|
Rough Ryder Alaska Scrimshaw Collection. This lock-back folder measures 4" closed with a 3" s.s. blade. Smooth bone scales with Moose scene. Double bolsters and brass liners. The blade has half stop and plenty of snap. The knife has never been used and is like new.
|
Vintage Smith & Wesson 789016 scrimshaw style reproduction 2005 by artist Pam Essex new in box. The blade measures 2.5" and 6" open. The handle is some kind of black plastic lock-back style. The knife has never been used and is in mint condition with original box.
|
Ka-Bar Olean, N.Y. model 1500 Japan with whale scrimshaw on one side and a tall ship on the other. The knife has a 2" upswept blade with nail nic. The handle is ivory color with beautiful scrimshaw. This is a nice little lock-back in mint condition.
|
|
|
|
KERSHAW
|
|
ROUGH RYDER
|
|
PARKER CUT. CO.
|
|
|
|
|
|
|
|
|
Kershaw lock-back with silver bear inlay. This is an older knife that has been customised with a sterling silver bear inlay well done. The knife measures 3.5" closed with 2.5" blade, and rosewood handle. There is some light pitting on the blade otherwise that knife is like new condition.
|
Rough Ryder Alaskan series wolf scrimshaw lock-back folding knife in mint condition. Model RR192. The knife has a 440 s.s. that measures 3". The smooth bone scales have a nice scrimshaw scene of a wolf in the wild. Nickel silver double bolsters. The knife measures 4" closed.
|
Vintage 1890's Parker Cut. Co. Kayak, Canoe Knife mint in the box. The surgical steel blades are marked Japan. Rare Christmas Tree handles accented with brass bolsters and liners. The blades are tight no wobble and plenty of snap. The box is also mint. The knife measures 3.5" closed.
|
|
|
|
PARKER CUT. CO.
|
|
CASE
|
|
SPYDERCO
|
|
|
|
|
|
|
|
|
Parker Cut. Co. Wildlife Series Mustang 4000, Lock-back folder new old stock MIB. The 2.5" blade is etched with a Mustang. The handle scales are stripped Xmas Tree accented with brass fittings. The knife measures 3.5" closed. Like new 80"s vintage with original box.
|
Case 1974 6 Dot 2138 ss Sod Buster USA. The knife has an etched 3.5" blade and measures 4.75" closed. The handle is black syntheic with brass fittings. The knife has never been used like new wit pouch sheath.
|
The Spyderco Tri-Angle Sharpmaker Model # 203MF mint in plastic pack. This is new old stock knife sharpener, never used like.
|
|
|
|
MARBLE'S
|
|
MARBLE'S
|
|
ROUGH RIDER
|
|
|
|
|
|
|
|
|
Marble's Sunfish Knife, Slip joint folding knife, toe nail knife
|
Marble's MR581 sunfish, toenail knife, with Leopard scrimshaw on white bone handle. The knife has 440 s.s. blades measuring 3" and 2". The bolsters are nickel silver with brass liners. This slip joint folder has half stops and is made very well. The knife measures 4.25" closed. Never used mint condition. Made in China from one of the better knife making factories for sure. Box included.
|
Rough Rider knives sunfish, toenail knife with buffalo scrimshaw bone handle. This heavy duty slip joint folder measures 4" closed, with a 3" and 2" 440 s.s. blades. The smooth bone scales look great with the bison scrimshaw. These knives are made in China but they are quality made and will last a life time. Never used mint condition.
|
|
|
|
ROUGH RYDER
|
|
ROUGH RYDER
|
|
MARBLE'S
|
|
|
|
|
|
|
|
|
Rough Ryder knives sunfish, toenail knife with Rhinoceros scrimshaw bone handle. This heavy duty slip joint folder measures 4" closed, with a 3" and 2" 440 s.s. blades. The smooth bone scales look great with the Rhino scrimshaw. These knives are made in China but they are quality made and will last a life time. Never used mint condition.
|
Rough Ryder knives sunfish, toenail knife with sailing ship scrimshaw bone handle. This heavy duty slip joint folder measures 4" closed, with a 3" and 2" 440 s.s. blades. The smooth bone scales look great with the ship on the high seas scrimshaw. These knives are made in China but they are quality made and will last a life time. Never used mint condition.
|
Marble's MR581 sunfish, toenail slip joint folding knife with bone handle scrimshaw of a sea horse. The knife measures 4" closed and has 2 440 s.s. blades one 3" other 2". The smooth bone scales are bright and look great with the scrimshaw. The knife is very well made with half stops and plenty of snap. Never used mint condition.
|
|
|
|
KERSHAW
|
|
OLSON GEOFF
|
|
BELL
|
|
|
|
|
|
|
|
|
Kershaw model 1620VIB assisted opening knife. The blade measures 2.5" and 5.75" open. This is a very beautiful knife that is marked with 4 x's on the blade which means its a factory second. That being said the blemish is very small.
|
This is a lock-back folding knife made by Steep Mountain USA. It has been hand scrimshaw artwork done by Alaskan Scrimshaw Artist Geoff Olson. The 440 s.s. blade measures 2". The handle scales are smooth bone with bear paw scrimshaw. The knife measures 5.5" open and 3.5" closed. The knife comes with a unique wooden display box. Never used but has some rust on one of the bolster pins. I think it could be rub out.
|
Vintage Sports Man's Lock Knife by Bell made in Korea mint in the box. The flat ground stainless steel blade measures 3". The handle scales are ebony accented with brass bolsters and pins. The bolsters are beveled which adds a nice touch. The blade has plenty of snap and no wobble. The knife is well made and never used or carried. Its just been in the box for many years and could use a little polish.
|
|
|
|
ROUGH RYDER
|
|
ROUGH RYDER
|
|
OUTDOOR EDGE CUTLERY CORP.
|
|
|
|
|
|
|
|
|
Rough Ryder knives sunfish, toenail knife with Lion scrimshaw bone handle. This heavy duty slip joint folder measures 4" closed, with a 3" and 2" 440 s.s. blades. The smooth bone scales look great with the Lion scrimshaw. These knives are made in China but they are quality made and will last a life time. Never used mint condition. Original box included.
|
Rough Ryder knives sunfish, toenail knife with bears scrimshaw bone handle. This heavy duty slip joint folder measures 4" closed, with a 3" and 2" 440 s.s. blades. The smooth bone scales look great with the moma and cub bear scrimshaw. These knives are made in China but they are quality made and will last a life time. Never used mint condition. Original box included.
|
FIELD-LITE DESIGN by DAVID BLOCH, made in Seki Japan mint in the box. Vintage 1980's or 90's. The 3.5" CHROME-MOLY 8A blade is partial serrated with thumb stud. The handle is Zeytel with clip. Very study mid-lock folder made for outdoor use. I carry this model myself and love it. Never used mint in box with paper.
|
|
|
|
WESTERN KNIVES
|
|
SCHRADE
|
|
SCHRADE
|
|
|
|
|
|
|
|
|
Vintage Western U.S.A. W 39 excellent used condition. The 5" carbon steel blade has thumb notches, there are some scratches and patina but the blade is full. The handle is rosewood accented with brass guard and aluminum pommel. OAL: 9" The markings are aa bit different on this knife. The blade is stamped Western with U.S.A. under it, and the guard is stamped W-39. The knife is solid no problems and comes with a custom made sheath.
|
Vintage Schrade Scrimshaw SC-507 Mint in the Box. The knife has a 3.5" blade and is measures 8.5" open. The handle is simulated ivory with engraving by Frank Giorianni. The bolsters and liners are brass. This knife is in mint condition with original leather sheath and display box. The bolsters could use some polish which I would be glad to do if desired. The box is near mint with just a small scrap on the top edge.
|
Vintage Schrade Scrimshaw SC-507 Mint in the Box. The knife has a 3.5" blade and is measures 8.5" open. The handle is simulated ivory with engraving by Frank Giorianni. The bolsters and liners are brass. This knife is in mint condition with original leather sheath and display box. The bolsters could use some polish which I would be glad to do if desired. The box has a couple scraps.
|
|
|
|
PARKER CUT. CO.
|
|
SYRACUSE KNIFE CO
|
|
KABAR
|
|
|
|
|
|
|
|
|
Vintage 1981 2 blade hunting knife by Parker Cut. Co. Both blades are surgical steel and measure 3.5". The handle scales are nice looking smooth bone accented with nickel silver bolsters. The knife has never been used or carried and would be mint with a little polish. Blades are tight with plenty of snap. Leather sheath no box.
|
Syracuse Knife Co. Polish survival knife number 390, made in Poland by Camillus. This multi tool knife has a 3.75" saw blade and plain blade. It has a 2.5" blade plus bottle opener and corkscrew. This is a heavy duty well made knife in excellent plus condition.
|
Vintage Kabar 1203 USA never used near mint condition. The 4" blade still has a bright original mirror polish finish. The leather stacked handle is in like new condition accented with brass guard and aluminum pommel. OAL: 8.75". Hard to find in this condition.
|
|
|
|
WESTERN KNIVES
|
|
KHYBER
|
|
CASE
|
|
|
|
|
|
|
|
|
Vintage 1980's Western U.S.A. W84 F in mint condition with custom leather sheath. This knife has a 4" stainless steel drop point blade with satin finish. The handle is wood accented with brass pins. OAL: 8.75". The knife has never been used and is in mint condition.
|
Vintage Jumbo Khyber 2603 lock-back folding knife in near mint condition. The 3.5" s.s. blade has a mirror polish finish with nail nic. The handle scales are deep rich maroon micarta accented with s.s. fittings. The knife measures 8.5" open and 4.75" closed. The blade has plenty of snap and no wobble. The knife has never been used and is near mint with just a couple light scratches on the large pin.
|
Vintage 1978 CASE Mako Shark P158 LSSP 2 dot. This is the first year this knife was made it has the 3" blade with etching. The knife has never been used and has been polished to near mint. The blade has plenty of snap and no wobble.
|
|
|
|
KERSHAW
|
|
KERSHAW
|
|
KERSHAW
|
|
|
|
|
|
|
|
|
KERSHAW 1660 TROUT KAI USA KEN ORION DESIGN. The blade is 3" with bead blast finish and double thumb studs. Beautiful trout handle scales and belt clip. Never used mint condition. Great liner lock with spring assisted blade that really snaps open.
|
KERSHAW LEEK1660 SNAKE KAI USA KEN ORION DESIGN. The blade is 3" with bead blast finish and double thumb studs. Beautiful snake skin handle scales and belt clip. Never used mint condition. Great liner lock with spring assisted blade that really snaps open.
|
Kershaw Leek Model 1660G, made in the USA, Ken Orion design. Gold plated 3" blade 7" open. Great liner lock assisted opening knife in mint condition.
|
|
|
|
GERBER
|
|
GERBER
|
|
SPYDERCO
|
|
|
|
|
|
|
|
Vintage 1996 Gerber E-Z OUT 450, item # 06751 mint in the box. The serrated blade measures 3". The handle I believe is Zytel with Kraton rubber insert for comfort. The knife is mid-lock, removable s.s. clip and measures 8" open. The knife has a nice half stop and good snap. Mint condition with original Box and warranty paper. Box is in very good condition nice package for the discerning collector.
|
Vintage 1990's Gerber Gator mint in bubble pack very rare find. This early Gator and a 3.5" s.s. blade with serrated edge. Rubber handle with mid-lock design. OAL: 8.5". One of Gerber's best selling knife in mint condition in original bubble pack. The bubble pack is not perfect it has a slight bend and some bumps here and there. Still a very nice original display.
|
Ultimate vintage kitchen knife made exclusively for Spyderco Inc. USA by Masahiro in Seki Japan. MBS-26 High Carbon Stainless steel. The blade measures 4.5" with oal: 9". The knife is in mint condition with original carboard sleeve.
|
|
|
|
SCHRADE
|
|
MUELA
|
|
SCHRADE
|
|
|
|
|
|
|
|
|
Vintage 1986 Statue of Liberty Centennial Commemorative Knife by Schrade MIB. This beautiful folding hunter has a 3" etched blade, deep amber color jig bone scales with nickel silver bolsters. There is also a sterling silver inlaid shield of the Museum of the City of New York. The package includes a nice wood display case, Reproduction print by Edward Moran, and the original shipping box. Hard to find this minty even the plastic cover is mint. Limited Edition serial number on bolster is 2912. The bolsters could use some polish otherwise pristine mint.
|
Vintage 1980's Commando, Camp knife by Muela. The 6" blade has a satin finish and is razor sharp. The handle is simulated buffalo horn finger grooved and accented with brass fittings. OAL: 10.5". These knives are made by a family owned cutlery in Spain. They are well made for the price. This one has never been used its in mint condition with original leather sheath.
|
Vintage Schrade Walden N.Y. U.S.A. 225h, Bowie Folding Hunter in mint condition. The 2 blades measure about 3.5" each. The handle scales are jig bone Delrin accented with nickel silver bolsters. The knife measures a little over 5" closed. This is a safe queen never used, or carried like new.
|
|
|
|
KERSHAW
|
|
CAMILLUS
|
|
SCHRADE
|
|
|
|
|
|
|
|
|
Vintage Kershaw Oregon USA "OUT LAW BILL", Model 1065 by Kai Japan. The 3.5" blade is hollow ground and very sharp. The handle scales are rubber with finger grooves very comfortable. OAL; 8.5". Handmade in Japan never used mint condition with custom nylon sheath and box.
|
Vintage Camillus 26 Sword Brand 2 blade hunter known as Big Jack. The knife has 2 4" blades. The handle is Staglon looks great with nickel silver bolsters. Big knife measures 9.25" open. Never been used near mint condition. Nice handmade knife plenty of snap.
|
Vintage Schrade U.S.A. 227UH, Uncle Henry 2 blade folding knife in mint condition. The 2 blades measure 4". The handle is Staglon with nickel silver bolsters. The knife measures 9.25" open. The knife has never been used or carried and comes with a leather sheath. Both blades have plenty of snap and lock up tight.
|
|
|
|
SPYDERCO
|
|
KERSHAW
|
|
KERSHAW
|
|
|
|
|
|
|
|
|
Vintage Spyderco Clipit Endura in mint condition. This is the larger model with 3.25" AUS-8 Stainless serrated blade. The handle has the molded clip. Great knife in mint condition. It came with the original box but was lost.
|
Customized Kershaw 1620 Scallion Assisted Opening Knife with Scrimshaw bone Scales. This knife was customized by John Stultz of JRS Knife Works. The logo's on the blade have been buffed off and custom etching has been added. The blade measures 2.25". 3.25" closed. The handle has been customized with bone scales scrimshaw whale. I can find nothing wrong with the knife but it was probably a factory second with some blemish on the blade. Everything lines up and works perfect. This is a one of a kind custom knife in excellent condition.
|
Customized Kershaw 1620 Scallion Assisted Opening Knife with Paua Scales. This knife was customized by John Stultz of JRS Knife Works. The logo's on the blade have been buffed off and custom etching has been added. The blade measures 2.25". 3.25" closed. The handle has been customized with gorgeous paua scales. I can find anything wrong with the knife but it was probably a factory second with some blemish on the blade. Everything lines up and works perfect. This is a one of a kind custom knife in excellent condition.
|
|
|
|
KERSHAW
|
|
KERSHAW
|
|
KERSHAW
|
|
|
|
|
|
|
|
|
Customized Kershaw 1620 Scallion Assisted Opening Knife with casted black MOP Scales. This knife was customized by John Stultz of JRS Knife Works. The logo's on the blade have been buffed off and custom etching has been added. The blade measures 2.25". 3.25" closed. The handle has been customized with casted black mop scales with scrimshaw. I can find anything wrong with the knife but it was probably a factory second with some blemish on the blade. Everything lines up and works perfect. This is a one of a kind custom knife in excellent condition.
|
Customized Kershaw 1620 Scallion Assisted Opening Knife with Tru-Stone scales. This knife was customized by John Stultz of JRS Knife Works. The logo's on the blade have been buffed off and custom etching has been added. The blade measures 2.25". 3.25" closed. The handle has been customized with Tru-Stone scales and silver cactus inlay. I can't find anything wrong with the knife but it was probably a factory second with some blemish on the blade. Everything lines up and works perfect. This is a one of a kind custom knife in excellent condition.
|
Customized Kershaw 1660 Leek Assisted Opening Knife with Tru-Stone scales. This knife was customized by John Stultz of JRS Knife Works. The logo's on the blade have been buffed off and custom etching has been added. The blade measures 3" open and. 4" closed. The handle has been customized with Tru-Stone scales and Paua Polar Bear inlay. I can't find anything wrong with the knife but it was probably a factory second with some blemish on the blade. Everything lines up and works perfect. This is a one of a kind custom knife in excellent condition.
|
|
|
|
KERSHAW
|
|
WESTERN KNIVES
|
|
WESTERN KNIVES
|
|
|
|
|
|
|
|
|
Customized Kershaw 1660 Leek Assisted Opening Knife with gorgeous paua scale. This knife was customized by John Stultz of JRS Knife Works. The logo's on the blade have been buffed off and custom etching has been added. The blade measures 3" open and. 4" closed. The handle has been customized with Paua shell scale. I can't find anything wrong with the knife but it was probably a factory second with some blemish on the blade. Everything lines up and works perfect. This is a one of a kind custom knife in excellent condition.
|
Vintage Western U.S.A. 541 E Staglon handles mint condition. The blade measures 3.5" with nail nick. The scales are staglon with nickel silver bolsters. The knife measures 8.5" open and 5" closed. This beauty has never been used and is about mint just needs a little polish. The knife comes with a handmade custom pouch sheath.
|
Western S-521 D Nature Series Lynx etching on blade. The 2.5" 440 s.s, blade has the duck etching. The handle is wood grain. The bolsters are nickel silver with brass liners. The knife measures 6" open and 3.5" closed. This knife has never been used and is in mint condition.
|
|
|
|
CASE
|
|
PARKER CUT. CO.
|
|
SPYDERCO
|
|
|
|
|
|
|
|
|
Vintage 1985 Case Mako P158-LSSP Folding Knife mint in box. The knife has a 3" blade 4" closed. The handle scales are paka-wood accented with brass bolsters. This is a 5 dot made in 1985 in mint condition with box and sheath. The box is in excellent condition for its age.
|
Vintage PARKER CUT. CO. GAME-GETTER K119 folding Bowie near mint. The 3.5" blade has wild life etching and is marked PARKER CUT. CO. on one side and GAME-GETTER on the other side. The Parker logo is weak but that's common. Awesome stag scales with brass liners. Never used would be mint with a little polish.
|
Vintage Spyderco Clipit Delica mint in the black box. The serrated blade measures 2.5". The blade is marked Spyderco on one side and Seki-Japan on the other side. The clip is integral. This is a safe queen never used or carried.
|
|
|
|
PRECISE
|
|
SCHRADE
|
|
SPYDERCO
|
|
|
|
|
|
|
|
|
Vintage Bob Loveless style Precise Deerslayer lock-back folding knife mint in the box. The 440 stainless drop point blade measures 3". The handle scales are nice looking rosewood accented with nickel silver bolsters and brass liners. Measures 4.25" closed. Fantastic craftsmanship these Seki Japan knives are becoming very collectible. Very hard to find in this condition with original box. Era 70's to 80's.
|
Schrade SC507 Covered Wagon Scrimshaw, Limited Edition #10046. This beauty has a nice scrimshaw scene and limited edition etched on the blade. The knife has brass bolsters and pins. This lock-back folder is large and measures 8.75" open and 5" closed. The knife has never been used and comes with the original display box and sheath all near mint.
|
The ultimate utility, kitchen knife Made Exclusively for Spyderco. Inc. USA by Masahiro in Seki Japan MBS-26 High Carbon Stainless Steel. The 8" blade has a razor sharp serrated edge and is flexible. The handle is rubber molded contour fit with ridges for a great grip. OAL: `13". This is old new stock in mint condition. Comes with original cardboard sleeve.
|
|
|
|
SPYDERCO
|
|
KERSHAW
|
|
BUCK
|
|
|
|
|
|
|
|
|
The ultimate utility, kitchen knife Made Exclusively for Spyderco. Inc. USA by Masahiro in Seki Japan MBS-26 High Carbon Stainless Steel. The 8" blade has a razor sharp serrated edge and is flexible. The handle is rubber molded contour fit with ridges for a great grip. OAL:13". Mint condition.
|
Kershaw Leek 1660 Ken Orion Design made in the USA. Custom digital scroll engraving on handle and blade. The blade measures 3" and the knife measures 7" open. The knife is a liner-lock, with assisted opening. Nice looking knife never used mint condition.
|
Buck model 325 Colleague liner lock folding knife with custom Moose Antler scale. The 2" blade is made of 420c C. The s.s. frame has Moose Antler drop on one side. Double thumb studs for left and right hand use. The knife measures 4.75" open. Never been used mint condition.
|
|
|
|
COLD STEEL
|
|
WESTERN
|
|
RKP TUNTURI-PUUKKO
|
|
|
|
|
|
|
|
|
Cold Steel Master Hunter 36C old stock in original box Made in USA. The 4.5" blade is marked carbon V. The knife has a rubber handle with lanyard hole. OAL: 9.25". The knife has few few light carbon spots otherwise mint. The sheath is mint the box is a little rough.
|
Vintage Western U.S.A. S-062 two blade folding knife in near mint condition. The two 4" s.s. blades are marked stainless on one and Western U.S.A. S-062 D on the other. The handle is Delrin jig bone. Measures 5" closed. The knife is near mint and comes with fancy leather sheath.
|
Vintage folding Puukko knife by RKP Tunturiloma Oy. The blade measures 3.5". The handle is black textured material with brass fittings. The lock up device is extra heavy duty. OAL: 8.25". Very nice older knife made in Finland. The knife is used but in excellent plus condition. Could use a little polish. The original sheath is in very good condition. This would make one heavy duty user or great collectible very hard to find.
|
|
|
|
MABRLE'S
|
|
SCHRADE
|
|
PARKER
|
|
|
|
|
|
|
|
|
Vintage 3 line Marble's Ideal with original leather sheath. The 6: blade is full but scratched up. The leather handle is solid and tight as are the spacers. The aluminum pommel is a add on perhaps the original was plastic. OAL: 9 7/8". A good condition solid knife could use a little cleaning. The snap is broke on the sheath and lose stitching.
|
Vintage 1982 Schrade U.S.A. LB8 Papa bear with two line stamp in near mint condition. The blade is 3.5". The handle is Staglon accented with brass fittings. The bolster has serial number 33447 stamped on it. The knife measures 8.5" and 5" closed. The blade has plenty of snap no wobble line up perfect. Could use a little polish and would be mint. No sheath.
|
Vintage Parker Custom Series Conquistador Black Lip Pearl folding knife. The knife has a 3.5" blade with etching and fancy file work. The handle is a gorgeous combination of beautiful black lip pearl and nickel silver fittings. Back straps are also completely file worked. The knife measures 5" closed. High quality handmade by the best. The knife has never been used and is near mint condition. PS the bolsters could use some polish.
|
|
|
|
KERSHAW
|
|
KERSHAW
|
|
CASE
|
|
|
|
|
|
|
|
|
Vintage Kershaw, Kai Cutlery, Field & Stream Task Force Model 1029 TF mint in the Box. Handmade in Japan. This is a very hard to find model in any condition. The 4" blade is flat ground and very sharp. The handle is rubber Kraton with finger grooves. OAL: 8.25". The knife has never been used and is in mint condition with original Nylon sheath and box.
|
This is a vintage 1985 Kershaw model 2101 Rotary lock folding knife in mint condition. The s.s. blade measures 1.75" and oal open 5". The handle is water buffalo horn with finger grooves. This unique knife opens and closed by placing both fingers on the dial while turning. The blade is marked kershaw oregon usa on one side and by KAI japan 2101 on the other. Never been used mint condition.
|
Vintage 1980 Case 10 dot Shark Tooth lock-back folding knife near mint with sheath. Case P197 LSSP. The 3" blade is etched with attacking shark. The handle scales are Pakkawood accented with heavy brass fittings and liner. OAL: 8 3/8". This knife has never been used and other than needing a little polish it is about mint. The knife comes with a custom leather sheath.
|
|
|
|
SCHRADE
|
|
KERSHAW
|
|
PARKER CUT. CO.
|
|
|
|
|
|
|
|
|
Vintage Schrade Kachina Scrimshaw Knife with Indian Beaded Sheath Mint in the Box. This lock-back has a 3.5" blade. The handle is scrimshaw of Indian doll. The scrimshaw was done by artist Frank Giorgianni. This is a limited edition serial #05453 is mint in the box with sheath and papers.
|
Scarce vintage 1980's Kershaw Hacho Model 2120 in mint condition. The 3" AUS-8 blade is hollow ground with a bright mirror polish finish. The handle scales are smooth water buffalo bone accented with brass slanted bolsters and 4 pins. Made is Japan by Kai, fantastic craftsmanship it doesn't get any better. Knife measures 6.75" open. The blade locks up tight and is well centered. No pouch or box just a beautiful knife.
|
Vintage 1980's "THE LITTLE BANDIT" WILDLIFE SERIES, folding knife mint in the box. Parker Cut. Co. handmade in Japan. The surgical steel 3" blade has etching and a mirror polish finish. The handle is the rare hard to find white micarta accented with brass pins and bolsters. Knife measures 4" closed. Very well made, blade is centered, tight and plenty of snap. Nice new old stock in mint condition with original box.
|
|
|
|
SCHRADE
|
|
KERSHAW
|
|
KERSHAW
|
|
|
|
|
|
|
|
|
Vintage Schrade "Sun Dance Scrimshaw" Limited Edition Folding Knife. This knife honors the Sioux Indians with Scrimshaw by Frank Giorgianni and beaded leather sheath. The bolster is stamped with low serial #0177. The knife is in mint condition with display box and paperwork all like new accept for a dent in the box. The brass has not been polished but if desired I would be glad to polish it for the new owner.
|
Kershaw Macho model 2120 with scrimshaw lion by G. Harbour. The s.s. blade measures 3.25" and oal: 6.75". This lock-back folder has brass bolsters and bone handle with beautiful scrimshaw scene. The knife has never been used and is near mint but could use some polish on the bolsters. No box or certificate.
|
Kershaw model 2110 with scrimshaw ducks by Karst. The s.s. blade measures 2.25" and oal: 5.25". This lock-back folder has brass bolsters and bone handle with beautiful scrimshaw scene. The knife has never been used and is near mint but could use some polish on the bolsters. Box included no certificate.
|
|
|
|
KERSHAW
|
|
KERSHAW
|
|
KERSHAW
|
|
|
|
|
SOLD
|
|
|
|
|
|
|
Kershaw model 2110 with scrimshaw ice fishing scene by GD. The s.s. blade measures 2.5" oal: 5.5". This lock-back has never been used and is near mint. No box or certificate.
|
Kershaw model 1040 with scrimshaw buck by Walter Alexander. The s.s. blade measures 2.75" and oal: 6.75". This lock-back folder has brass bolsters and bone handle with beautiful scrimshaw scene. The knife has never been used and is near mint but could use some polish on the bolsters. No box or certificate.
|
Kershaw Macho model 2120 with scrimshaw Big Horn by W Alexander. The s.s. blade measures 3.25" and oal: 6.75". This lock-back folder has brass bolsters and bone handle with beautiful scrimshaw scene. The knife has never been used and is near mint but could use some polish on the bolsters. No box or certificate.
|
|
|
|
Santa Fe Stoneworks
|
|
SANTE FE STONEWORKS
|
|
SANAT FE STONEWORKS
|
|
|
|
|
|
|
|
|
Santa Fe Stoneworks lock-back folding knife from the Cholla Cactus series. Beautiful black resin infused cholla cactus scales with nickel silver bolsters and 440 s.s. 2.5" blade. Measurers 3" closed. This knife has never been used and is in mint condition with original black box and paper.
|
Santa Fe Stoneworks lock-back folding knife from the Cholla Cactus series. Beautiful red resin infused cholla cactus scales with nickel silver bolsters and 440 s.s. 2.5" blade. Measurers 3" closed. This knife has never been used and is in mint condition with original black box and paper.
|
Santa Fe Stoneworks lock-back folding knife from the Cholla Cactus series. Beautiful blue resin infused cholla cactus scales with nickel silver bolsters and 440 s.s. 2.5" blade. Measurers 3" closed. This knife has never been used and is in mint condition with original black box.
|
|
|
|
KERSHAW
|
|
KERSHAW
|
|
KERSHAW
|
|
|
|
|
|
|
|
|
Kershaw Macho model 2120 with scrimshaw Elk scene by W Alexander. The s.s. blade measures 3.25" and oal: 6.75". This lock-back folder has brass bolsters and bone handle with beautiful scrimshaw scene. The knife has never been used and is near mint but could use some polish on the bolsters. No box or certificate.
|
Kershaw Macho model 2120 with scrimshaw Moose scene by W Alexander. The s.s. blade measures 3.25" and oal: 6.75". This lock-back folder has brass bolsters and bone handle with beautiful scrimshaw scene. The knife has never been used and is near mint but could use some polish on the bolsters. No box or certificate.
|
Kershaw Macho model 2120 with scrimshaw Eagle scene by W Alexander. The s.s. blade measures 3.25" and oal: 6.75". This lock-back folder has brass bolsters and bone handle with beautiful scrimshaw scene. Never been used near mint but could use some polish on the bolsters.
|
|
|
|
KERSHAW
|
|
ROUGH RYDER SOLD
|
|
CobraTec
|
|
|
|
|
|
|
|
|
Kershaw Macho model 2120 with scrimshaw whitetail buck scene by W Alexander. The s.s. blade measures 3.25" and oal: 6.75". This lock-back folder has brass bolsters and bone handle with beautiful scrimshaw scene. Never been used near mint condition but could use some polish on the bolsters. No box.
|
Rough Ryder RR2164 Copper Flipper liner-lock knife with hand engraving by Laur Designs. The 3" VG-10 s.s. blade is a drop point with satin finish. The handle is solid copper with beautiful hand scrolled engraving. The knife measures 7.25" open and 4.25" closed. The knife has never been used and is in near mint condition with original box. This is a very well made solid knife that works perfect.
|
CobraTec Bolster Release automatic with Blue Abalone scales and file work. The D2 carbon steel blade has fancy file work and is very sharp. The handle is silver polished aluminum with abalone scales and s.s. clip. File worked bolster is simply push sideways to open. The knife measures 7.5" open. This beauty has never been used and is in mint condition. Very strong well made knife.
|
|
|
|
KERSHAW
|
|
BROWNING SOLD
|
|
VALOR
|
|
|
|
|
|
|
|
|
Kershaw Scallion model 1620FL. Gorgeous laser engraving by Instinctively Savage. This is a frame lock assisted opener and works very well. The 2.5" blade has a bead blast finish. The knife measures 5.75" open. Never used mint condition.
|
Vintage Browning Tracker Series Limited Edition #0681 of 1000 Mint in the Box The 3.5" blade has etching of a bald eagle on one side and engraved serial number on the other side. The knife has a beautiful wood grain insert in a brass frame with engraved bolsters. Knife measures 8.25" open and 5" closed. The knife is in pristine mint condition with original brown velvet display case.
|
Vintage Valor Butterfly Knife made in Japan. The 4" 440-c stainless steel blade is black coated. The knife has a few light scratches but never really used blade is like new.
|
|
|
|
REMINGTON
|
|
VALOR
|
|
BENCH MARK
|
|
|
|
|
|
|
|
|
Vintage Remington UMC R-6 Skinner, Bush Crafter Special made in the U.S.A. The 4" blade has precision point control and saw. The handle scales are Delrin, Staglon with nickel silver bolsters. OAL: 8.75". The knife has never been used mint condition with original sheath, stone, papers, box and plastic guard for the saw teeth.
|
Vintage 1980's Bali-song, Butterfly knife by Valor. The 3.5" 440 s.s. black coated blade has a clip with swedge. The handle is s.s. black textured coated with s.s. latch. OAL: 9". The knife has never been used other than opening and closing. The condition is excellent plus.
|
Vintage Bench Mark Rolox Viper Light Weight Model. Bench Mark was a division of Gerber Knives Mint in the Box. The 2.5" blade has swedge and thumb notch. The handle is black micarta. Unique opening by pushing the blade forward and out till it locks. This knife is in pristine mint condition with original sheath and box. Knife was designed by Blackie Collins.
|
|
|
|
COLD STEEL
|
|
GERBER
|
|
AL MAR
|
|
|
|
|
|
|
|
|
Vintage Cold Steel Master Hunter 36C Mint in the Box. This is by far the best hunting knife Cold Steel ever made. The Carbon V steel blade measures 4.5" with flat grind and a razor edge. The Kraton rubber handle is kind of sticky for a great grip. OAL:9". This knife is in near mint condition and comes with the original box and sheath. They made 2 different sheaths for this model one was plain leather the other was Kydex and nylon.
|
Vintage Gerber Folding Hunter 1 made in Seki Japan mint condition. These were made between 1977 and 1980. This is the middle size of the 3 models with a 2.75" blade. The handle scales are Ebony with s.s. bolsters and brass liners. The knife measures 6.75" open and 3.75" closed. A beautiful knife very well made in mint condition. No box or sheath.
|
Vintage AL-MAR Proto-Type- AW-FISHERMAN mint in the box. This is a pre-production run #51 of 200. The ATS-34 s.s. blade is flat ground and measures 4.5". This mid-lock knife measurers 10.75" open and 6" closed. The knife is in mint condition with original nylon sheath and box. The sheath is pretty cool as it can be worn horizontal or vertical.
|
|
|
|
GERBER
|
|
WESTERN
|
|
MUELA SOLD
|
|
|
|
|
|
|
|
|
GERBER, Bench Mark, Rolox Diamondback AD 383, model #20210, Pre-Gerber Mint in the Box. The knife has a 3" blade with black micarta scales. This knife has a unique push the blade forward design. The knife measures 7.25" open and 4.25" closed. The blade is marked PAT D on one side and AD 382 on the other. This knife is in pristine mint condition with original leather sheath and box.
|
Vintage 1981 Western Pattern 524-S. The 2.25" blade is etched with dog scene. The handle is beautiful red jig bone with nickel silver bolsters. OAL; 6.25" open. The knife is about mint very nice and comes with a custom cape buffalo hide sheath.
|
Muela Lenador Bowie knife mint in the box. The 9.5" blade has a brush finish and is very sharp. The handle is wood with brass fittings. OAL: 15'. The knife has never been used and comes with original box and leather sheath.
|
|
|
|
BUCK
|
|
CASE
|
|
GERBER
|
|
|
|
|
|
|
|
|
Vintage Buck Kalinga MIB. 5" blade OAL: 10". Beautiful Red Buckarta handle with brass fittings. Comes with original box, sheath and paper all near mint. There is a in the velvet from the blade tip and the brass could use some polish.
|
Vintage 1960's CASE XX USA 516-5 in near mint condition with original leather sheath. The 5" blade has blood groove and finger notch. The handle is premium stag accented with s.s. guard and aluminum pommel. OA:" 9". The knife has never been used and is in near mint condition. The sheath is rather rare with metal guard.
|
Vintage Gerber Folding Hunter 1 made in Seki Japan mint condition. These were made between 1977 and 1980. This is the largest of the 3 models with a 3.5" blade. The handle scales are Ebony with s.s. bolsters and brass liners. The knife measures 8.25" open and 4.75" closed. A beautiful knife very well made in mint condition. No box or sheath.
|
|
|
|
ROUGH RYDER
|
|
KABAR
|
|
KERSHAW
|
|
|
|
|
|
|
|
|
Rare limited edition Rough Ryder stockman, with Mackinaw Island Bridge & lighthouse scene by Dan Cronan. Smooth bone scales with 3 blade 440 s.s. This knife is very well made and sharp. The knife measures 3.25" closed. The blades have plenty of snap and a bright mirror polish finish. Great scrimshaw by well known artist Dan Cronan. Mint condition.
|
Rare vintage Kabar 1184 USA, Jumbo folding hunter with 2nd blade serrated. This is a very hard to find knife in mint condition. The blades measures about 4" each with one being serrated. The handle scales are Staglon and they really look like stag very nice stuff. The knife measures 9" open and 5" closed. The knife has never been used and is in mint condition. Both blades have plenty of snap and are tight. Leather sheath included.
|
Kershaw model 1040 with scrimshaw buffalo scene by L. Karst The s.s. blade measures 2.75" and oal: 6.75". This lock-back folder has brass bolsters and bone handle with beautiful scrimshaw scene. Never been used near mint condition but could use some polish on the bolsters. Wooden display box included.
|
|
|
|
BUCK
|
|
TAYLOR/SETO
|
|
PUMA
|
|
|
|
|
|
|
|
|
Vintage Buck General Model 120 mint in the box. The blade measures 7.5" with blood groove. Black handle aluminum fittings. OAL: 11.75". The knife is in pristine mint condition with original sheath, box, and papers.
|
Vintage 1980's Manila Folder Model G-974, Bali-song, Butterfly Knife handmade in Japan for Taylor/Seto. The 3.5" surgical steel blade has a 2.5" clip. The handle is brushed aluminum very lightweight. OAL: 9". The knife shows no signs of wear and is like new.
|
Vintage 1972 (970 PUMA-GAME-WARDEN) in near mint condition. This knife is serial # 41272. The blade measures 3.75". The handle scales are Jacaranda accented with brass fittings. OAL: 8.75". The knife has never been used and is near mint with some light scratches on the bolsters. I hand polished this knife myself and it is very clean. The knife has rock-well sticker and mark. Custom pouch sheath included not original.
|
|
|
|
WESTERN WESTMARK
|
|
CASE
|
|
BLACKJACK
|
|
|
|
|
|
|
|
|
Vintage 1984 Coleman, Western, WestMark model 701, mint in the box. This is a limited edition serial #1030 in wooden display case. The 5" blade is s.s. with etching of a camp scene. The handle is some of the best looking stag you will ever find. Brass guard and aluminum butt. OAL:10". The knife is in pristine mint condition and so is the beautiful display case.
|
CASE XX 10 DOT USA 1836 Stag handle bowie knife with Mountain Man scene etched on blade. The 9.5" blade has bright mirror polish finish and beautiful etched scene. The handle is a large piece of drop dead gorgeous stag accented with brass fittings. OAL: 14.25". This beauty has never been used and is in mint condition. The knife was probably made in 1980 I believe. No Sheath or plaque just a great knife.
|
Very rare first run Blackjack mamba made in USA 1987. The blade measures 8" by 1/4" thick with a satin finish. The handle is black Kraton with stainless steel tubes and glue. OAL: 15". The knife has never been used and is in excellent condition no sheath. Some Info I Found Re the Mamba:
The Mamba is the design that really is responsible for launching the entire BlackJack company. The model dates back to the 1970's when the first versions were made and sold from a gun and knife shop that was owned by former BlackJack CEO Mike Stewart. Most of those early knives were made by Mr. Stewart himself. The
first example was made by Mike Stewart and a would be knife maker by the name of Thomas Vincent Miller. At the time Mr. Miller was interested in becoming a knife maker but for some unknown reason seems to have lost interest shortly his involvement with the first Mamba knife. According to information I have recently been sent by a fellow collector, there were approx. 3,000 - 4,000, of the full size Mamba's made, beginning in 1987, and ending in 1993. There were approx. 50 of these done with a moly blade coating. I now believe that the green and black examples below, are moly coated not titanium coated, as I have previously stated. Recently former BlackJack CEO Mike Stewart responded to a question about the full size variant of the Mamba on in the BlackJack forum. Mike had this to say.
"CS-51 was a modified 5160. It had moly added for a bit more toughness. All of the vintage Mambas were all U.S. made , except for one batch of 300. That batch was made by Harumi Suzuki from AUS-8. We finished the blades in our Van Nuys shop and put on the handles. You can tell these from all the others. The blades were about .200' thick and were marked Japan. There were a number of runs of the Mamba.
The first run the Kraton handles were pinned on and glued down. The pins were actually hollow s.s. tubing that was flared. The next run had s.s. screw sets that held the handles in place. The balance of the runs have harder kraton handles that were held on with two large black Allen screws and a brass threaded tube. These Allen sets are what we are going to use on the E.O. The first run was built in our Chatsworth , Ca. shop. 1987. The second run was built in our Canoga Park shop in 1988. The third run was built in our Van Nuys, Ca. shop in 1989. The next two runs were also Van Nuys, Ca. shop in 1990 & 91. The final run was in the Effingham Il. shop in 1993. I think that the total production did not exceed 2500 units. In retrospect, That is not very many units and may explain why we don't see many on the secondary market.
|
|
|
|
BROWNING
|
|
AL MAR
|
|
|
|
|
|
|
|
|
Vintage Browning German Damascus Limited Edition Hunting Knife with Wood Display case. Awesome German Damascus hollow ground blade measures 5" and is serial number 384. The handle is beautiful birds-eye maple with lots of character. The knife is hidden tang accented with engraved brass fittings. OAL: 9.25". This knife comes with the original wooden display case with Browning Logo and 1 of 500 on it. All in mint condition. The key is missing but the box opens and closes no problem.
|
Vintage AL MAR Shugoto, Tanken, Tanto Knife in mint condition with original leather sheath. This model has a 7" blade with bevel top edge. The handle is black rubber with brass guard. OAL: 11.25". This one is a safe queen never used or carried. The sheath is original snaps are not broke but there is a little vertigris on the sheath which will clean up easily.
|
|
|
