|
GIBSON FIXED BLADE TANTO
|
|
BALISONG
|
|
PARKER BROTHERS
|
|
|
SOLD
|
|
|
|
|
|
|
|
One of a Kind Integral Tanto Fighting Knife by Gibson.
|
Vintage 1980's Balisong, Butterfly Knife by Smoky Mountain Knife Works. The blade measures 3" with a black coat finish. The handle is camo with brass pins. The knife measures 7.5" open and 4.5" closed. The blade is marked surgical steel made in Japan. The knife is like new condition very clean does not appear to be used other than opening and closing.
|
Vintage 1980's Japanese Tanto knife by Parker Brothers. The 6" blade has a unique finish kinda looks like Damascus. The handle scales are Pakka-wood accented with nickel silver bolsters. Full tang construction with s.s. pins. OAL; 9.75". Nice older knife made in Japan and near mint with original sheath.
|
|
|
|
COLD STEEL
|
|
COLD STEEL
|
|
VALOR
|
|
|
|
|
|
|
|
|
Rare vintage Cold Steel key chain Tanto San Mai steel in mint condition. The blade measures 1.5" with rubber Krayton handle with lanyard hole. OAL: 3.75" open and 2.25" closed. Nice little knife in mint condition. No Box or sheath.
|
Vintage 1987 Recon Tanto 13R by Cold Steel Made in the U.S.A. The 400 series stainless steel blade has a cutting edge that measures 5.25" with a bead blast finish. The handle is rubber with brass fittings that are also bead blasted. This knife is different from the rest with its unique dome top pommel. OAL: 11.25". This knife is much rarer than the standard 13A version, as it was only made for about 1 or 2 years 1986-1987. This knife was no longer shown in the 1988 catalog. Also these 13R's were only available from Matthews Cutlery in Dacator Ga. This knife came from an old dealers inventory and other than the brass oxidation the knife is in mint condition. Premium zipper pouch included no sheath.
|
Vintage 1980's Bali-song, Butterfly knife by Valor. The 3.5" 440 s.s. black coated blade has a clip with swedge. The handle is s.s. black textured coated with s.s. latch. OAL: 9". The knife has never been used other than opening and closing. The condition is excellent plus.
|
|
|
|
STEVE POWERS PRICE REDUCED
|
|
PARKER EAGLE BRAND KNIVES
|
|
TAYLOR/SETO
|
|
|
|
|
|
|
|
|
Blade: 5.25" ats-34 s.s. Handle: brown micarta Sheath: leather OAL: 10" .
|
Vintage Tanto similar to the Al Mar Shuguto by Parker Eagle Brand Knives NO. AK-1651. This knife was farmed out to the same makers of Al Mar knives in Japan. The 9" blade is surgical steel with etching of eagle. The handle is black paka- wood with nickel silver bolsters and full tang. OAL: 13.25". The knife is mint in the box with original leather sheath.
|
Vintage Taylor/Seto Tanto with 24K Gold Dragon Overlay Mint in the Box This knife was made in Seki Japan by the same makers of Al MAR. The 6" s.s. blade was ground in the Japanese tradition very well done. The handle scales are second cut stag matching well on both sides. The knife has a taper tang, brass pins, and nickel silver bolsters. OAL:11.25". This knife is in mint condition and comes with original felt display case and leather sheath.
|
|
|
|
TAYLOR/SETO
|
|
KEITH COLEMAN TACTICAL TANTO FIGHTING KNIFE
|
|
COLD STEEL
|
|
|
|
|
|
|
|
|
Vintage 1980's Manila Folder G-972, Bali-song, Butterfly knife handmade by Taylor/Seto in Japan. The Weehawk design blade measures 3.5" with a 2.25" clip. The frame is solid brass with beautiful stag inlay. OAL: 9". The blade has never been used and with a little polish the knife will be like new.
|
Collector Grade Tactical Tanto, Fighting Knife Handmade by Keith Coleman from Los Lunas New Mexico.
|
Rare Vintage Cold Steel Outdoorsman Mini Tanto style knife with rare drop point blade. The 4" drop point blade has thumb rest and was ground from 3/16" stock. The handle is black Kraton with s.s. fittings. The knife is marked Cold Steel Inc. Ventura Calif. on one side and Made in Japan on the other. OAL: 7.75". This knife is in pristine mint condition with original leather sheath marked Japan.
|
|
|
|
TAYLOR/SETO
|
|
COLD STEEL
|
|
DAWSON, BARRY
|
|
|
|
|
|
|
|
|
Vintage 1980's G-973 Manila Folder, Bali-song, Butterfly Knife by Taylor/Seto. The Weehawk style blade measurers 3.5" with a 2.5" clip. The frame is brushed aluminum with rosewood inserts. OAL: 9". This beauty was handmade in Japan top of the line craftsmanship. The blade has never been used and the handle is very clean probably only opened a few times. Excellent plus condition and super lightweight.
|
Rare vintage 1980's Cold Steel Magnum Tanto 13M model in mint condition. This was the first of the Magnum Tanto's made in the later part of the 80's. The AUS8 stainless steel blade measures 9" with a raised spine. The handle is textured black Kraton accented with 300 series stainless steel fittings. OAL: 14.5". This is the first series to use the s.s. fittings, plus the raised spine and oval shaped guard. Hattori collectors tanto in pristine mint condition with original leather sheath marked Japan.
|
Japanese Kogai by Barry Dawson. The 4.5" blackened blade has a nice hamon line and top swedge. The handle is buffalo horn with ito wrap very well done. OAL: 9.25". This beauty has never been used and is in mint condition with original custom leather sheath.
|
|
|
|
COLD STEEL
|
|
|
|
|
|
|
|
Cold Steel Imperial Tanto San Mai Damascus Limited serial # 1112 in mint condition. The blade measures 5 3/4" with great looking Damascus. The handle is Ito wrapped over ivory color stingray skin. Stainless steel guard and extended pommel with lanyard hole. OAL: 11 1/8". This knife is very rare slightly over 1000 made in the 80's. This knife comes with the original black leather sheath marked Japan, purple silk bag, certificate plus sheath box. Hard to find with all this stuff. Copied from Cold Steel site: Cold Steel is proud to present the Imperial Tanto, the first San Mai Damascus Limited Edition with an unprecedented, East meets West, design. From its traditional armor piercing point, to modern skull cracking pommel, it reflects true state of the art craftsmanship worthy of an emperor.
GENUINE SAN MAI DAMASCUS
Only Cold Steel could bring you a masterfully forged blade with such an intriguing patterns. Every blade has a minimum of 80 stainless steel layers of hardness, which have been precisely hammer welded around a special ultra hard core to produce a blade capable of passing even the American Bladesmith Society's grueling test. (Certified by A.B.S Master Smith, Dan Maragni. Premium zipper pouch included.
|
|
|
