|
SPYDERCO
|
|
WESTERN KNIVES
|
|
KABAR
|
|
|
|
|
|
|
|
|
The Spyderco Tri-Angle Sharpmaker Model # 203MF mint in plastic pack. This is new old stock knife sharpener, never used like.
|
Vintage Western U.S.A. W 39 excellent used condition. The 5" carbon steel blade has thumb notches, there are some scratches and patina but the blade is full. The handle is rosewood accented with brass guard and aluminum pommel. OAL: 9" The markings are aa bit different on this knife. The blade is stamped Western with U.S.A. under it, and the guard is stamped W-39. The knife is solid no problems and comes with a custom made sheath.
|
Vintage Kabar 1203 USA never used near mint condition. The 4" blade still has a bright original mirror polish finish. The leather stacked handle is in like new condition accented with brass guard and aluminum pommel. OAL: 8.75". Hard to find in this condition.
|
|
|
|
WESTERN KNIVES
|
|
SPYDERCO
|
|
SPYDERCO
|
|
|
|
|
|
|
|
|
Vintage 1980's Western U.S.A. W84 F in mint condition with custom leather sheath. This knife has a 4" stainless steel drop point blade with satin finish. The handle is wood accented with brass pins. OAL: 8.75". The knife has never been used and is in mint condition.
|
Ultimate vintage kitchen knife made exclusively for Spyderco Inc. USA by Masahiro in Seki Japan. MBS-26 High Carbon Stainless steel. The blade measures 4.5" with oal: 9". The knife is in mint condition with original carboard sleeve.
|
Ultimate vintage kitchen knife made exclusively for Spyderco Inc. USA by Masahiro in Seki Japan. MBS-26 High Carbon Stainless steel. The blade measures 4.5" with oal: 9". The knife is in mint condition with original carboard sleeve.
|
|
|
|
WESTERN KNIVES
|
|
SPYDERCO
|
|
SPYDERCO
|
|
|
|
|
|
|
|
|
Vintage Western U.S.A. W39 E in mint condition with sheath. The 5" blade has thumb notch and a bright mirror polish finish. The rosewood handle is accented with brass guard and aluminum pommel. OAL: 9.5". This beauty is like brand new with dear scene on sheath.
|
The ultimate utility, kitchen knife Made Exclusively for Spyderco. Inc. USA by Masahiro in Seki Japan MBS-26 High Carbon Stainless Steel. The 8" blade has a razor sharp serrated edge and is flexible. The handle is rubber molded contour fit with ridges for a great grip. OAL: `13". This is old new stock in mint condition. Comes with original cardboard sleeve.
|
The ultimate utility, kitchen knife Made Exclusively for Spyderco. Inc. USA by Masahiro in Seki Japan MBS-26 High Carbon Stainless Steel. The 8" blade has a razor sharp serrated edge and is flexible. The handle is rubber molded contour fit with ridges for a great grip. OAL:13". Mint condition.
|
|
|
|
HENSLEY
|
|
MABRLE'S
|
|
ROADRUNNER
|
|
|
|
|
|
|
|
|
Wayne Hensley Serial #11 Limited Edition knife. Flint River Knife Club 2007 1 of 30. The blade measures 2.5" with a bright mirror polish finish. The handle scales are rosewood with 6 pins and lanyard hole. Full tang construction and etching on blade. OAL: 6". Knife has never been used and is in mint condition with original leather sheath.
|
Vintage 3 line Marble's Ideal with original leather sheath. The 6: blade is full but scratched up. The leather handle is solid and tight as are the spacers. The aluminum pommel is a add on perhaps the original was plastic. OAL: 9 7/8". A good condition solid knife could use a little cleaning. The snap is broke on the sheath and lose stitching.
|
This handmade knife is from the Texas Gunther collection and was probably made in the 70"s. The 3.5" hollow ground blade has a satin finish. The handle is deep rich rosewood accented with s.s. pins and aluminum guard. The knife is full tang with lanyard hole. OAL: 8". The knife does not appear to have been used much if at all. The knife is somewhat crude but has a cool factor and would made a great user. Original sheath included.
|
|
|
|
KERSHAW
|
|
KERSHAW
|
|
LE COUTEAU VOLANT
|
|
|
|
|
|
|
|
|
Vintage Kershaw, Kai Cutlery, Field & Stream Task Force Model 1029 TF mint in the Box. Handmade in Japan. This is a very hard to find model in any condition. The 4" blade is flat ground and very sharp. The handle is rubber Kraton with finger grooves. OAL: 8.25". The knife has never been used and is in mint condition with original Nylon sheath and box.
|
Vintage Kershaw, Kai Cutlery, Field & Stream Task Force Model 1031 TF mint in the Box. Handmade in Japan. This is a very hard to find model in any condition. The 5.5" blade is flat ground and very sharp. The handle is rubber Kraton with finger grooves. OAL: 10.25". The knife has never been used and is in mint condition with original leather sheath and box.
|
LE COUTEAU VOLANT DEPOSE, commando dagger called the flying knife. This vintage knife was made in France. The 7" blade is double edge top not sharp. The handle is hard rubber with double s.s. guard. OAL: 11.5". The knife has never been used or carried and is near mint with original leather sheath.
|
|
|
|
KABAR
|
|
COLD STEEL
|
|
COOK, DENNIS
|
|
|
|
|
|
|
|
|
Vintage 1927-1945 Kabar Union Cutlery Olean NY. The blade measures 7" and is still full and sharp with nice patina. The stacked leather handle with finger grooves is in very good condition and so are the spacers. Aluminum guard and pommel all tight. OAL: 11.5". This ia a very nice knife for it age and comes the original leather sheath which is also in very good condition.
|
Vintage Cold Steel Master Hunter 36C Mint in the Box. This is by far the best hunting knife Cold Steel ever made. The Carbon V steel blade measures 4.5" with flat grind and a razor edge. The Kraton rubber handle is kind of sticky for a great grip. OAL:9". This knife is in near mint condition and comes with the original box and sheath. They made 2 different sheaths for this model one was plain leather the other was Kydex and nylon.
|
Gorgeous little drop point hunting knife by Dennis Cook who is the husband of Lynn Dawson the niece of Barry Dawson. The 3" ATS-34 S.S. blade has file work and thumb notch. The handle scales are drop dead gorgeous birdseye maple accented with mosaic pins and lanyard hole. OAL: 7". A really nice knife that feels great in the hand and sure is pretty. Mint condition with original leather sheath. From the Ike collection.
|
|
|
|
MUELA SOLD
|
|
BUCK
|
|
CASE
|
|
|
|
|
|
|
|
|
Muela Lenador Bowie knife mint in the box. The 9.5" blade has a brush finish and is very sharp. The handle is wood with brass fittings. OAL: 15'. The knife has never been used and comes with original box and leather sheath.
|
Vintage Buck Kalinga MIB. 5" blade OAL: 10". Beautiful Red Buckarta handle with brass fittings. Comes with original box, sheath and paper all near mint. There is a in the velvet from the blade tip and the brass could use some polish.
|
Vintage 1960's CASE XX USA 516-5 in near mint condition with original leather sheath. The 5" blade has blood groove and finger notch. The handle is premium stag accented with s.s. guard and aluminum pommel. OA:" 9". The knife has never been used and is in near mint condition. The sheath is rather rare with metal guard.
|
|
|
|
LYNN, DAWSON
|
|
DICKSON KNIVES
|
|
KERSHAW
|
|
|
|
|
|
|
|
|
Little Hydra model by Lynn Dawson who is Barry Dawson's niece. The s.s. blade has a 2.5" cutting edge with satin finish. The handle scales are ivory paper micarta with 2 pins and taper tang. OAL: 6.5". Nice knife never used mint with original premium leather sheath.
|
Vintage Fighting Knife, Dagger, Stiletto, Survival Knife by Dickson Knives. The Damascus double edge blade measures 6". The handle is deep rich rosewood accented with large double brass guard and pommel. OAL: 10.5". The knife comes with the original well made leather sheath. The knife has never been used and is about mint could use some polish.
|
Kershaw Easy Rider Series set of 4, model 2205,2210, 2220, and 2230 all in mint condition. The 4 knives all have etched scenes, rosewood inserts with s.s. frames. The blades are made of AUS*-A.s.s.. This was a salesman sample and did not come with sheaths. These knives were made between in the 70's to the 80's.
|
|
|
|
BROOKS, GLEN
|
|
BROOKS, GLEN
|
|
RITT
|
|
|
|
|
|
|
|
|
Handmade hunting knife by Glen Brooks. The 4.25" s.s. blade is hollow ground with a brush finish. The handle scales are Ebony with 6 pins. The knife is full tang construction with fancy file work. OAL: 9". The knife has a dovetail s.s. guard and file work for thumb rest. The knife has never been used and is near mint with original custom fit leather sheath.
|
Handmade hunting knife by Glen Brooks. The 4.25" s.s. blade is hollow ground with a brush finish. The handle scales are gorgeous rosewood burl with 6 pins. The knife is full tang construction with fancy file work. OAL: 8.75". The knife has a dovetail s.s. guard and file work for thumb rest. The knife has never been used and is near mint with original custom fit leather sheath.
|
This well made knife is from the Texas Gunther collection. The makers name is Ritt and the knife is stamped number 83. The knife was probably made in the 70's. The 4" blade is hollow ground with a bright mirror polish finish, and fancy file work. The handle is deep rich finger grooved rosewood accented with unique shaped brass guard. The knife has a slight taper tang and 9" OAL. This knife has never been used but has some light sheath scratches otherwise mint. The sheath is not original to the knife but fits ok. PS the knife has initials RB on the butt.
|
|
|
|
ANDERSON G
|
|
HUMPHRIES. SOLD
|
|
LYNN, DAWSON
|
|
|
|
|
SOLD
|
|
|
|
|
|
|
Handmade drop point hunting by G. Anderson of Utah. The knife has a 4" hollow ground blade that is hair shaving sharp with thumb notch. The handle is dyamondwood which is really tuff stuff and looks good. The knife has a brass guard and full tang with lanyard. OAL: 8.25". This knife has never been used and is in mint condition with original sheath.
|
Handmade dagger by Humphries. The 5" double edge blade has a mirror polish finish and file work. The handle scales are the old discontinued Westing House Ivory Micarta. The knife is full tang with double guard and 10 pins. OAL: 9". Well made knife probably from the 70's in near mint condition with premium custom sheath marked 918 on back.
|
Medium Hydra Model by Lynn Dawson who is Barry Dawson's niece. The s.s. blade has a 3" cutting edge with a satin finish. The handle scales are ivory paper micarta with a pins and lanyard hole. The knife is full tang construction with file worked spine. OAL: 7.75". Nice knife is mint condition with original leather sheath.
|
|
|
|
HENDRIX
|
|
CASE
|
|
CARROL, CHAD
|
|
|
|
|
|
|
|
|
Nice little bird & trout knife by Wayne Hendrix. The 2 3/4" blade is hollow ground with a mirror polish finish. The handle is stag accented with s.s. guard and a fine taper tang. OAL: 6 1/2". The knife has serial # 1930 on the tang. The knife has never been used and is in mint condition. Leather sheath included.
|
CASE XX 10 DOT USA 1836 Stag handle bowie knife with Mountain Man scene etched on blade. The 9.5" blade has bright mirror polish finish and beautiful etched scene. The handle is a large piece of drop dead gorgeous stag accented with brass fittings. OAL: 14.25". This beauty has never been used and is in mint condition. The knife was probably made in 1980 I believe. No Sheath or plaque just a great knife.
|
Vintage hand forged Bowie Knife by Chad Carrol. The blade measures 11.5" and is razor sharp. The coffin shaped handle is Rosewood accented with brass fittings and full tang construction. The knife has been carried but nit used for cutting and is in excellent condition. Original custom sheath which can be worn several ways.
|
|
|
|
MAXWELL, DON
|
|
PACIFIC CUTLERY
|
|
HIBBEN, DARYL SOLD
|
|
|
|
|
|
|
|
c
Custom Handmade Boot Knife, Hunting Knife by Don Mxwell from Fresno California. The 4" blade has a brushed finish on the flat area. The scales are desert ironwood accented with s.s. dovetail bolsters and mosaic pins. The knife has a very fine taper tang. OAL: 8.25". The knife has never been used and is in mint condition with original sheath.
|
Tanto by Kuzan Oda made for Pacific Cutlery in the 70's. This was a limited edition of 2,500 knives. The 6" blade has a simulated hamon line and beveled spine. The handle is ribbed rubber with s.s. guard. OAL: 10.5". The knife has never been used and is near mint with original sheath which can be worn left or right. Kuzan worked with Bob Loveless in the 70. Bali-song, Benchmade Knives.
|
Sub-Hilt Fighting Knife by Daryl Hibben the younger brother of Gill Hibben. The 7" s.s. blade is double edge sharp with a fine bead blast finish. The handle scales are green micarta accented with brass fittings. The knife has a full tang with file work. OAL: 12". Superb craftsmanship this knife has never been used and is in mint condition with original sheath.
|
|
|
|
RODEWALD, GARY
|
|
COLD STEEL
|
|
BLACKJACK
|
|
|
|
|
|
|
|
|
Hand forged Bowie Knife by Master Smith Gary Rodewald of Montanna. The 10.25" blade has a slight clip with satin finish. The handle is stabilized maple burl accented with nickel silver guard. OAL: 15.5". The knife has never been used but had some rust from storage. It has been cleaned and polished so the makers mark is lite, but the rust is gone. There are some light blemishes otherwise excellent condition with original sheath.
|
Vintage 1st gen Cold Steel Tanto 13A in mint condition with sheath no box. The blade measures 5.75" and the oal: is 11.25". The handle is rubber with brass fittings. Original leather sheath with belt slits. The knife has never been used but could use some polish on the brass otherwise mint. This knife is the very early version stamped with marking on one side only and made in the USA.
|
Very rare first run Blackjack mamba made in USA 1987. The blade measures 8" by 1/4" thick with a satin finish. The handle is black Kraton with stainless steel tubes and glue. OAL: 15". The knife has never been used and is in excellent condition no sheath. Some Info I Found Re the Mamba:
The Mamba is the design that really is responsible for launching the entire BlackJack company. The model dates back to the 1970's when the first versions were made and sold from a gun and knife shop that was owned by former BlackJack CEO Mike Stewart. Most of those early knives were made by Mr. Stewart himself. The
first example was made by Mike Stewart and a would be knife maker by the name of Thomas Vincent Miller. At the time Mr. Miller was interested in becoming a knife maker but for some unknown reason seems to have lost interest shortly his involvement with the first Mamba knife. According to information I have recently been sent by a fellow collector, there were approx. 3,000 - 4,000, of the full size Mamba's made, beginning in 1987, and ending in 1993. There were approx. 50 of these done with a moly blade coating. I now believe that the green and black examples below, are moly coated not titanium coated, as I have previously stated. Recently former BlackJack CEO Mike Stewart responded to a question about the full size variant of the Mamba on in the BlackJack forum. Mike had this to say.
"CS-51 was a modified 5160. It had moly added for a bit more toughness. All of the vintage Mambas were all U.S. made , except for one batch of 300. That batch was made by Harumi Suzuki from AUS-8. We finished the blades in our Van Nuys shop and put on the handles. You can tell these from all the others. The blades were about .200' thick and were marked Japan. There were a number of runs of the Mamba.
The first run the Kraton handles were pinned on and glued down. The pins were actually hollow s.s. tubing that was flared. The next run had s.s. screw sets that held the handles in place. The balance of the runs have harder kraton handles that were held on with two large black Allen screws and a brass threaded tube. These Allen sets are what we are going to use on the E.O. The first run was built in our Chatsworth , Ca. shop. 1987. The second run was built in our Canoga Park shop in 1988. The third run was built in our Van Nuys, Ca. shop in 1989. The next two runs were also Van Nuys, Ca. shop in 1990 & 91. The final run was in the Effingham Il. shop in 1993. I think that the total production did not exceed 2500 units. In retrospect, That is not very many units and may explain why we don't see many on the secondary market.
|
|
|
|
DAWSON, BARRY
|
|
BROWNING
|
|
DONAVAN, PAT
|
|
|
|
|
|
|
|
|
Japanese Kogai by Barry Dawson. The 4.5" blackened blade has a nice hamon line and top swedge. The handle is buffalo horn with ito wrap very well done. OAL: 9.25". This beauty has never been used and is in mint condition with original custom leather sheath.
|
Vintage Browning German Damascus Limited Edition Hunting Knife with Wood Display case. Awesome German Damascus hollow ground blade measures 5" and is serial number 384. The handle is beautiful birds-eye maple with lots of character. The knife is hidden tang accented with engraved brass fittings. OAL: 9.25". This knife comes with the original wooden display case with Browning Logo and 1 of 500 on it. All in mint condition. The key is missing but the box opens and closes no problem.
|
Vintage stag fighting knife by Pat Donavan. The 7" blade is double edge sharp with a fine hand rub finish. The handle scales are premium sam bar stag accented with s.s. dovetail bolsters. The knife has a taper tang. OAL: 11.75". There is custom file work where the blade meets the bolsters very nice work. The knife has never been used and is near mint accept for some very light scratches on the bolsters. Custom leather sheath with metal boot clip.
|
|
|
|
PARDUE, JOE
|
|
AL MAR
|
|
AL MAR
|
|
|
|
|
|
|
|
|
Beautiful Damascus & Gold Lip Pearl Liner-Lock Knife by Joe Pardue. Joe is the son of the late Mel Pardue and his knives are as popular. The 2.5" blade has file work and gem stone thumb stud. The handle is gorgeous gold lip pearl accented with blued Damascus Mosaic bolsters and gold screws. The back strap has abalone inlays and file work. The knife measures 6" open. Very well done blade lines up very smooth operation. Mint condition.
|
AL MAR Shugoto 4004 in mint condition. This bad boy has a 7" blade with FNR handle and brass guard. OAL: 11.25". Vintage 1980's with original sheath. Made in Seki Japan. The guard could use some polish otherwise it is pristine mint condition.
|
Vintage AL MAR Shugoto, Tanken, Tanto Knife in mint condition with original leather sheath. This model has a 7" blade with bevel top edge. The handle is black rubber with brass guard. OAL: 11.25". This one is a safe queen never used or carried. The sheath is original snaps are not broke but there is a little vertigris on the sheath which will clean up easily.
|
|
|
|
KALFAYAN ED
|
|
AL MAR
|
|
AL MAR
|
|
|
|
|
|
|
|
Beautiful Sub-Hilt Fighter by the late Ed Kalfayan. The 7.25" ATS-34 s.s blade has a partial double edge top not sharp. The mirror polish finish is top notch and the blade is razor sharp. The handle is deep rich African blackwood. The fittings are all 416 s.s. accented with red, black, and white liners OAL: 11.75". There is something about the feel of a Kalfayan knife that is like no other. And this one feels really good in the hand. Fantastic fit and finish, knife has never been used and is in near mint condition. Also comes with original leather sheath made by Ed.
|
Rare AL MAR Phantom Tanken Dagger Prototype #060 of 200 in mint condition. Vintage 1980's has a 5.5" blade partial double edge top not sharp. Black Zertel handle with brass guard and lanyard hole. OAL: 10". The knife was made in Seki Japan by one of the best. The knife is in mint condition and comes with the original sheath marked 4007, 4006 on back.
|
Vintage AL MAR SERE 6 Pre-Production Run #150 of 200. This beauty has a 7" spear point blade with incredible saw teeth. The handle is the old brown micarta accented with stainless steel bolsters and brass attachment holes. OAL: 12". The knife has never been used or carried and comes with the original leather sheath. The snap to the stone cover is broke as most are and some verigris on the brass holes of the sheath.
|
|
|
|
SKY BOB, HAJOVSKY
|
|
PARRISH, ROBERT
|
|
CARROL, CHAD
|
|
|
|
|
|
|
|
|
Massive Bowie by Robert Hajovsky also known as Bob Sky Knives. Bob was a founding members of the Knifemakers Guild. This is one of the most incredible Bowies I have had to offer for sale. This massive knife weighs 3 pounds and was ground from 5/8th stock. The handle is gorgeous rich desert ironwood accented with nickel silver fittings. Blade length 11.5" OAL: 17.25". The craftsmanship on this knife is over the top probably one of the best works I have seen from this maker. Deep grind with super mirror polish finish. The knife has never been used and is in mint condition. Zipper pouch included.
|
Rare vintage hollow handle survival knife by Robert Parrish. The 8" 440-C spear point blade has a 3.5" clip that is sharp and incredible saw teeth. The checkered hollow handle with O ring is for storage. The double guard and cap have lanyard holes for attachments. OAL: 13". This knife is serial number 584204. The serial number dates the knife May of 1984 number 204. The craftsmanship of a Parrish knife is in a class of its own and this is a great example with original leather sheath with stone. The knife and sheath have never been used or carried and are in mint condition.
|
Awesome Damascus Double edge sword by Chad Carroll from Grant Michigan. The Damascus blade is random pattern with sharp edges. The handle is dark rich stabilized box elder burl accented with hot blued steel fittings. The hilt and pommel are copper pinned and have black and brass spacers. The oal: is 24.5". The custom sheath is spalted oak. Chad's mark and js stamp are on the hilt. The sword and sheath are very well done, never used excellent to mint condition.
|
|
|
